New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

YEP ESC 150A (2~6S) SBEC Brushless Speed Controller

YEP ESC 150A (2~6S) SBEC Brushless Speed Controller

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$64.79
Already Purchased
Status:
In Stock
SKU:
9351000011
WANT FREE SHIPPING? Click here to find out more!

We are proud to offer you our YEP ESC series. Although being an exceptional helicopter ESC the YEP range is unbelievably popular with fixed wing aircraft. Featuring programming options such as super smooth soft start, fixed RPM mode (governor mode) and ultra high resolution, you'll be hard pressed to find a better ESC on the market today! 

We have tested these units on our own helicopters and found them to be among the best we have ever seen. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

YEP ESCs are built to last and can be programmed via optional programing card or by transmitter stick inputs.


Features:
• Powerful 5.5V/6A Switching BEC
• Optional programming card for convenient setup 
• Super fine throttle resolution provides first-rate and highly accurate linearity 
• Super smooth adjustable start-up mode
• Constant RPM mode (governor mode)
• Adjustable F3A brake.  
• 3 steps adjustable normal EMF brake  
• High anti-interference capability
• Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4  
• Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC)
• Low voltage cut-off can be disabled  
• Variable cut-off voltage / cell    
• Active free-wheeling circuit allows for unlimited "partial load" capability
• LED status display  
• Adjustable motor timing from 0° to 30°  
• Blocked rotation protection (senses a jammed motor and stops motor rotation)  
• Motor reversing from ESC (no need to change ESC/motor wires) 
• Over-temperature protection and overload alarm  
• Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off.  
• Safe power-on. (Motor will not start until throttle is returned to lowest position) 

Specification:
Max Cont Current: 150A
Max Burst Current: 170A for 10 seconds
Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery
BEC: 5.5V/6A Switching BEC
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 70x32x15mm
Weight: 95g (including wires)

**Programming card is required to change setting 

  • SKU 9351000011
  • Brand YEP
  • Capacity (mAh) -
  • Shipping Weight 138.0000
  • Packaging Length 170.00
  • Packaging Width 70.00
  • Packaging Height 70.00
  • Programming the YEP using throttle
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The YEP 150 LV remains remarkably cool. However 150 A should be limited to short bursts, and the Freewheel turned ON to limit power dissipation at part load, plus additional capacitors added to the DC input especially with heavy loads such as EDFs. Otherwise the capacitors can overheat then burst and have a short life.
Two capacitors are not sufficient for this ESC . Add two 1000 mfd. 35 volt low ESR capacitors, and one more at each 200mm of lead. The capacitors overheated and burst on mine due to excessive ripple current.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

The YEP 150 LV remains remarkably cool. However 150 A should be limited to short bursts, and the Freewheel turned ON to limit power dissipation at part load, plus additional capacitors added to the DC input especially with heavy loads such as EDFs. Otherwise the capacitors can overheat then burst and have a short life.
Two capacitors are not sufficient for this ESC . Add two 1000 mfd. 35 volt low ESR capacitors, and one more at each 200mm of lead. The capacitors overheated and burst on mine due to excessive ripple current.

i use a few of these on my helis and it is a great ESC for 6S setup... i like the governor store, it works fine. It gets a bit warm after 5min flight on 550 and 600 size heli, but has never shut down or anything - no problems at all...

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

i use a few of these on my helis and it is a great ESC for 6S setup... i like the governor store, it works fine. It gets a bit warm after 5min flight on 550 and 600 size heli, but has never shut down or anything - no problems at all...

Great bang for the buck!! If you set it up right, it won't let you down. great power delivery as well!! I think it's better than it's big brother, the 120a 14s esc!! There are other good esc's out there but not this high amps, voltage and performance at this low price. Could it be better? maybe. But it's hard to beat at this price range!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Great bang for the buck!! If you set it up right, it won't let you down. great power delivery as well!! I think it's better than it's big brother, the 120a 14s esc!! There are other good esc's out there but not this high amps, voltage and performance at this low price. Could it be better? maybe. But it's hard to beat at this price range!

Montato su un Sab Goblin 500, dopo qualche volo si e' bruciato costringendomi ad eseguire un'autorotazione con il modello molto lontano da me.
Comunque i danni sono contenuti al carrello e all'ingranaggio principale.
Da notare che prima del 150 Ah avevo montato un 100 Ah sempre YEP che funzionava benissimo.
Preciso che non e' stato cambiato nessun settaggio dal 100 al 150 e che il motore non e' stato sostituito, quindi e' sicuramente il regolatore difettoso.
Non acquistatelo.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

Montato su un Sab Goblin 500, dopo qualche volo si e' bruciato costringendomi ad eseguire un'autorotazione con il modello molto lontano da me.
Comunque i danni sono contenuti al carrello e all'ingranaggio principale.
Da notare che prima del 150 Ah avevo montato un 100 Ah sempre YEP che funzionava benissimo.
Preciso che non e' stato cambiato nessun settaggio dal 100 al 150 e che il motore non e' stato sostituito, quindi e' sicuramente il regolatore difettoso.
Non acquistatelo.

A friend of mine and me together have about 10 of these speed controllers running in different applications from aerobatic plane, hotliner, EDF to boat. They are our first choice according price/value as long as the 150A version can be fitted into the model. Based on the price policy smaller versions only make sence if you can not fit this one into the model.

It definately makes sence to buy the prog card.
We have this controller running on almost all types of motors (from 2 pole inrunner to high pole outrunner). With the prog card we always found a setting that worked well but for this you definately need this card.

Best Regards!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A friend of mine and me together have about 10 of these speed controllers running in different applications from aerobatic plane, hotliner, EDF to boat. They are our first choice according price/value as long as the 150A version can be fitted into the model. Based on the price policy smaller versions only make sence if you can not fit this one into the model.

It definately makes sence to buy the prog card.
We have this controller running on almost all types of motors (from 2 pole inrunner to high pole outrunner). With the prog card we always found a setting that worked well but for this you definately need this card.

Best Regards!

Kein Vergleich zum Original,wenn man keinen rger mchte sollte man lieber etwas mehr bezahlen und hat Qualitt

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kein Vergleich zum Original,wenn man keinen rger mchte sollte man lieber etwas mehr bezahlen und hat Qualitt

got a bad one. ordered a year ago. Plugged it in then and made sure it work. Dint really test long, heard some beeps and motor ran. A year later got around to finishing the super sniper build with a het 36mm 2000kv motor on 6 cell. As I was programming with the controller. Noticed the motor jerked while in programming. Tried everything still happened random. So Did a few static runs. I did a couple full power, but sometimes when i pulled back down from power it would just cut out. like i had lost a signal but all servos would be working. Then the esc would start getting very hot if i dint unplug it. Once unplugged and reconnected it would work again. Still random the esc would send mini blips of power to the motor. At random times ether when hooking up the battery, or stick all the way down or in any part of programming. I have several other YEP esc like the 40's ,60's and 120HV .... All work flawless . But this 150 esc was a bad one...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got a bad one. ordered a year ago. Plugged it in then and made sure it work. Dint really test long, heard some beeps and motor ran. A year later got around to finishing the super sniper build with a het 36mm 2000kv motor on 6 cell. As I was programming with the controller. Noticed the motor jerked while in programming. Tried everything still happened random. So Did a few static runs. I did a couple full power, but sometimes when i pulled back down from power it would just cut out. like i had lost a signal but all servos would be working. Then the esc would start getting very hot if i dint unplug it. Once unplugged and reconnected it would work again. Still random the esc would send mini blips of power to the motor. At random times ether when hooking up the battery, or stick all the way down or in any part of programming. I have several other YEP esc like the 40's ,60's and 120HV .... All work flawless . But this 150 esc was a bad one...

gia e da molto tempo che uso questi regolatori,qualita buoni bisogna solo imparare a farci la regolazione con la schedina

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

gia e da molto tempo che uso questi regolatori,qualita buoni bisogna solo imparare a farci la regolazione con la schedina

Betreibe mehrere YEP Regler (60-150A) schon seit zwei Jahren, ohne Probleme. Programmier-Karte sollte dazu gekauft werden, was die Programmierung sehr erleichtert.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Betreibe mehrere YEP Regler (60-150A) schon seit zwei Jahren, ohne Probleme. Programmier-Karte sollte dazu gekauft werden, was die Programmierung sehr erleichtert.

yep....il meglio che si possa trovare su hobbyking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

yep....il meglio che si possa trovare su hobbyking

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
YEP 150 ESC-BEC Download [51]
YEP manual pdf Download [51]
YEP 150A + Neu 1512 Brushless Download [232]
ESC BURNED DOWN WHILE START UP DONT BUY Download [139]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking