T-34 Mentor Balsa 880mm (ARF)

• Overall
• Quality
• Value

Customer Rated

Nov 24, 2012

Nice plane flies well onD2822/14 Brushless Outrunner 1450kv and Turnigy nano-tech 1300mah 3S 25~50C Lipo Pac also looks good and is exellent value

• Overall
• Quality
• Value

Customer Rated

Aug 19, 2012

I finally put this plane together. What was I waiting for? It is a great little airplane. I don't know why some people have said "You have to keep the speed up" or "Tip stalls on landing" I haven't had any problems like that. As a matter of fact. This is one of my most relaxing planes to fly. I have only been flying about 8 months and can easily handle this plane. Lands beautiful everytime. I'm looking to put retracts or some scale struts on it.



Emax 2220/10 220w

APC 9x6 SF

Hurc 30a esc

3 TP 9g servos

Orange 6ch RX w/sat

3s Zippy 1600mah



AUW 701g

• Overall
• Quality
• Value

Customer Rated

Jul 09, 2012

well I put it on the table to fix the landing gear I broke a year ago and then replaced it with another plane. I will have it in the air later in the year. Like I said before not a relaxing plane to fly and if I have to repair it again I probably won't as at 50$ it is not worth it.

Would I buy another, no this wanabe war bird is just that, not worth the time

• Overall
• Quality
• Value

Customer Rated

May 18, 2012

9 6 apc turnigy park 450 910kv outrunner 25 amp esc 1300 3s nanotech. very good looking, kit steerable nose wheel, good covering like always. A light wind flyer will hand launch if grass is too long. Fly's like any small war bird. Pretty fast , high stall speed, very aerobatic. All up a good little plane.

• Overall
• Quality
• Value

Customer Rated

Apr 16, 2012

This plane arrived intact and was very nicely covered. It was easy to put together although I didnt bother with the landing gear, as usual its extremely flimsy. It was a bit tricky installing 2 servos for the ailerons since I wanted to have flaperons enabled. She flew real nice and very fast with 9X6 prop and a turnigy park 400. Unfortunately I crashed it head on during a miscalculated inverted maneuver it was beyond repair. Make sure to dial in 50pcnt expos and to use 60pcnt low rates on your servos.

• Overall
• Quality
• Value

Customer Rated

Feb 23, 2012

This is really a good kit. The woodcut is precisious and it seems very resistant. Well, this is a good manufacturer and for this price, it's very cheap!

• Overall
• Quality
• Value

Customer Rated

Jan 04, 2012

Este avion vuela muy bien, recominedo utilizar baterias de 2000 mAh, la terminacion exelente para su precio, el tren de aterrizaje que esta bajo el ala es un poco debil y ahy que tener cuidado al aterrizar, entrar con 1/4 de motor, por debajo de eso tiende a desplomarse, el monokote deberia mejorar se despega en partes pero tiene muy buena terminacion

• Overall
• Quality
• Value

Customer Rated

Dec 29, 2011

Maiden Flight yesterday. Setup: Turnigy L2006A Motor and APC 8x4 Prop. Full throttle 19Amps, 210W. Flys very nice and lot of torque. Since I dont have a computer Transmitter (no Expo) I have to be very carefull with the controls, coz ailerons are quite long. Once you get used to, lot of fun to fly and looks great in the air. Landing is a bit tricky, needs some speed. Great Plane for the money - 5 crowns

• Overall
• Quality
• Value

Customer Rated

Dec 19, 2011

very well finished, leaving his appearance even better, easy to ride, only problem was found open space for the wing servo. in my opinion should have 02 servos in the wing.

• Overall
• Quality
• Value

Customer Rated

Nov 27, 2011

Nice kit, well finished. Yet, if you want to have fun flying it, I would suggest that you make a mod so that the battery sits all the way down at the same level of the wings. Otherwise, be ready to experience sudden flip-overs and deadly spirals when slowing down for landing.