New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Durafly EFX Racer High Performance Sports Model 1100mm (43.7") (PNF) - Terracotta Edition

Durafly EFX Racer High Performance Sports Model 1100mm (43.7") (PNF) - Terracotta Edition

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$172.75
Status:
In Stock
SKU:
9499000349-0
WANT FREE SHIPPING? Click here to find out more!

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

 

This 1100mm (43.7") span model boasts a huge list of high-performance features that set the EFX apart from the competition. The AeroStar 3536 1780KV brushless outrunner for only the best performance. The pre-installed AeroStar 60A ESC has been optimized to deliver smoothly the power you need when you want it and all control surfaces use high speed, high torque digital 9g servo's (metal geared on the ailerons) together with ball link connectors to deliver true precision and control throughout the speed range.

 

The EFX Racer's high performance doesn't end with the electronics. The airframe has been engineered to be both rigid and lightweight, utilizing both glass and carbon fiber reinforcements throughout the model in combination with Super Compressed EPO foam and a highly polished surface finish to deliver the ultimate in performance in the air and the sleekest of looks on the ground. The EFX clips and screws together in minutes. Connect the control surfaces to the servos and install your own choice of receiver & lipo pack and you are ready to fly!

 

Versatility is another of the design features of the EFX Racer. Right out of the box you're provided with two different power options, 8x6 for 3cell and 7x6.5 for 4cell. For good all round sports performance a 2200mah 3S lipo on the 8x6 will give good speed and is recommended for pilots less experienced with fast models. However, for true high speeds and power when you open the throttle, a 1800mah 4S on the 7x6.5 is the winners choice and will get you going over 100mph.

 

Complimenting the amazing speeds of the EFX is its stunning agility in the air. A simple under arm hand launch at 3/4 throttle from standing gets the EFX in the air and you'll have unlimited vertical as soon as you open up to full (4S). A full house of controls (Aileron, Elevator, Rudder) gives the EFX remarkable aerobatics performance. Loops can be as BIG as you want them, rolls are very precise either fast or slow and the EFX will knife edge all day long! Thanks to the exceptionally strong airframe, high powered, high G maneuvers will not present a problem either. The EFX Racer will never fail you, but always leave you wanting more! It's not all about going fast and turning hard, you'll find the EFX handles exceptionally at slows speeds with both elegance and confidence inspiring grace. This is especially true in landing where you'll find no hint of a stall and good control all the way down to the ground.

 

Whatever set-up you choose and however you prefer to fly, your EFX Racer will perform and deliver time and time again and always keeping you coming back for more.

 

Features:
• 100mph+ performance right out of the box (on 4S set-up).
• High-quality AeroStar Brushless Motor and ESC
• Powerful and fast 9g digital servos.
• Supplied with 8x6 propeller for 3S and 7x6.5 propeller for 4S set-ups.
• Super Compressed EPO foam construction.
• Glass and carbon fiber reinforcement throughout the airframe.
• No glue assembly. Just clicks and screws together in minutes.
• Ball link control system.
• Full complement of spare parts available.

 

Specs:
Wingspan: 1100mm (43")
Length: 760mm (30.2")
Flying weight: 910g (32oz)
Motor: AeroStar 3536 1780KV Brushless Outrunner
Prop: 8x6 (3S) and 7x6.5 (4S) supplied
Battery: 1800mah 14.8V 4S (30C min) or 2200mah 11.1V 3S (30C min)
Servos: 4 x 9g digital servos (metal geared on ailerons)
ESC: AeroStar 60A
Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder)

 

Requires:
6 ch receiver and transmitter
1800mah 14.8V 4S (30C min) on 7" prop - 2200mah 11.1V 3S (30C min) on 8" prop

 

Note: Manual can be found in the "Files" tab above.

  • SKU 9499000349-0
  • Brand Durafly
  • Shipping Weight 1679.5000
  • Packaging Length 1183.00
  • Packaging Width 235.00
  • Packaging Height 180.00
  • IC/2:Elec Elec
  • Motorsize(diam-or-cc) -
  • Wingspan(mm) 1100.00
  • Length(mm) 760.00
  • SaleWeight(g) 910.00
  • Capacity (mAh) -
  • Durafly EFX Racer 1100mm - HobbyKing Product Video
  • Durafly EFX Racer 1100mm - HobbyKing Product Profile
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I own all 3 Versions of the EFX. (Original Efxracer, Efxtra, and this new Efxracer) I would say the new Version of the Efxracer combines the best parts of all the earlier models. Larger Battery compartment, Alu Spinner, original Wing.
Only complaint I had, the canopy latch magnet was not glued in the right position, so the canopy wouldn't close all the way, and was lean.
Easy fix.
A 4s 2200mah, or a 5s 1800mah will fit. Been flying it all stock on 5s since day one. No problem so far.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I own all 3 Versions of the EFX. (Original Efxracer, Efxtra, and this new Efxracer) I would say the new Version of the Efxracer combines the best parts of all the earlier models. Larger Battery compartment, Alu Spinner, original Wing.
Only complaint I had, the canopy latch magnet was not glued in the right position, so the canopy wouldn't close all the way, and was lean.
Easy fix.
A 4s 2200mah, or a 5s 1800mah will fit. Been flying it all stock on 5s since day one. No problem so far.

Well... I don't even know how to start.
The plane is very nice designed, above average, nice electronics. Wing servos are metal gear. Rudder and Elevator plastic. CG is very easy to balance. Nice colour pallet also. It flies amazing!
The space inside is a bit tight but it fits well my drone 1500 4S batteries. However, it may be needed to do some mod to accommodate better the lipo, since the motor bullets pass just underneath the battery which take some space out.
The plane flies very good and it's very fast. Not a starter plane definitely.
Now, what bothered me the most.... HK insist with a weak QC!! The plane is very bad glued. I had a small crash, and the motor instantaneously went through the fuselage since it was almost no glue to fix it!!! The only solution I had was to cut the plane in two halves, and glue everything by myself!! not ideal for a plane that just has flown twice!
On the same crash, the wing just broke in the two halves. It seems to me that it has a weak point near the opening vent (that is also used to screw the wing to the fuselage), and it can easily start cracking from there.
To sum up, I have a half racer half glue in the sky!
So my recommendation is as soon as you receive it, just reenforce these points!

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

Well... I don't even know how to start.
The plane is very nice designed, above average, nice electronics. Wing servos are metal gear. Rudder and Elevator plastic. CG is very easy to balance. Nice colour pallet also. It flies amazing!
The space inside is a bit tight but it fits well my drone 1500 4S batteries. However, it may be needed to do some mod to accommodate better the lipo, since the motor bullets pass just underneath the battery which take some space out.
The plane flies very good and it's very fast. Not a starter plane definitely.
Now, what bothered me the most.... HK insist with a weak QC!! The plane is very bad glued. I had a small crash, and the motor instantaneously went through the fuselage since it was almost no glue to fix it!!! The only solution I had was to cut the plane in two halves, and glue everything by myself!! not ideal for a plane that just has flown twice!
On the same crash, the wing just broke in the two halves. It seems to me that it has a weak point near the opening vent (that is also used to screw the wing to the fuselage), and it can easily start cracking from there.
To sum up, I have a half racer half glue in the sky!
So my recommendation is as soon as you receive it, just reenforce these points!

Customer files
EFX manual.pdf Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save