Country
United States
 
Shipped From:
  • UK
  • Global
  • Australia (AUS)
  • EU

Turnigy nano-tech 2500mAh 3S1P 5~10C Transmitter Lipo Pack

Turnigy nano-tech 2500mAh 3S1P 5...

Typically reserved for high amp draw performance applications Turnigy nano-tech batteries represent the pinnacle of performance, reliability and value for money. Taking these same manufacturing principles and technology, our engineers crafted a li...
9210000036

Now save save $0.00 $0.00

$15.99
224g
9210000036


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

Typically reserved for high amp draw performance applications Turnigy nano-tech batteries represent the pinnacle of performance, reliability and value for money. Taking these same manufacturing principles and technology, our engineers crafted a line of transmitter specific LiFePo4 batteries for those seeking dependability, quality and life cycle unequalled by any other battery on the market today. When quality counts go with the worlds most trusted performance battery, Turnigy nano-tech.

*Note: This is a Lipoly battery. You will need to use a Lipoly compatible battery charger when charging these batteries. NEVER attempt to charge these batteries in your transmitter unless the transmitter is specifically designed to charge a Lipoly battery. 

Spec.
Capacity: 2500mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 5C Constant / 10C Burst
Weight: 147g (including wire, plug & case)
Dimensions: 95 x 30x 24mm
Balance Plug: JST-XH
Discharge Plug: JR & Futaba

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Kv(rpm/v)
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch):
    No
  • Max Currents (A):
    No
  • Power (W)
    No
  • A(mm)
    No
  • B(mm):
    No
  • Length B (mm):
    No
  • C(mm)
    No
  • Can Length D(mm)
    No
  • Max Voltage(V):
    No
  • D(mm):
    No
  • Shaft A(mm)
    No
  • E(mm)
    No
  • F(mm):
    No
  • Diameter C(mm):
    No
  • Total Length E(mm)
    No
  • SKU
    9210000036
  • Weight(g):
    224.00
  • Length:
    96.00
  • Width
    25.00
  • Height
    30.00
  • Capacity (mAh):
    2500.00
  • Discharge(c):
    5.00
  • Length-A(mm)
    95.00
  • Height-B(mm)
    30.00
  • Width-C(mm):
    24.00
  • Unit Weight (g):
    147
  • Max Charge Rate(C)
    5.00
  • Watt Hour
    27.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

I use this battery for my Taranis X9D plus, and Kopropo Ex5 ur. Little bit of mods required for Kopropo, also changed the plug on battery itself to a 2s balance lipo plug
(3 pins) so it fits directly into Taranis. Going to purchase another battery.
Fits snug in a Taranis X9D , pre-installed connectors do not fit the Taranis out of the box, but was incredibly easy to pull a 2S balance plug off a dead lipo I had laying around and fit that instead. Is great to be able to pull the battery out & charge up a heck of a lot faster (though NOT through the OEM/stock charger, obviously) than the stock battery via leaving the radio plugged in overnight - which I often forgot to do.
great battery fits snugly in a Turnigy 9x, great run times better flight security over AA type batteries.
I use this on my Taranis plus, but had to change connector - Taranis fits 2S balance plug - only two wires - without middle one...
Bought for DEVO 10. Excellent fit, Great Price, Reliable Source (HobbyKing), Fast Shipping. With a slight / minor bending of the top tabs of the existing servo plug pins, I inserted them into a JST male connector. No cutting or soldering.

I finished it by pre-inserting shrink tube, and covered half of the JST connector and about a quarter inch over the wires.

To charge it I bought the Turnigy E3 Compact 2S/3S Lipo Charger 100-240v (US Plug) from HobbyKing too. Excellent value (Less than $13), since I will only be using it to charge this pack, it's plenty sufficient. Worked great right out of the box and the Lipo pack is already in use in my DEVO 10 :)
I using it with Turnigy 9X Transmitter it works great.But my advice is, per cell should be 4V otherwise it can be harmful for transmitter because transmitters are designed for work with totally 12V.I advice this product.
I bought a battery in the transmitter previously as a replacement battery pack instead of the previously used battery NiCd and NiMH, who suffered from memory effect and had to be recharged more often and format.

With this battery I fly all year round without formatting, maintenance and frequent charging.

It was an excellent choice!

Baterii jsem si pordil do vyslace ji drve, jako nhradu bateriovho packu msto drve pouvanch bateri NiCd a NiMH, kter trpely pametovm efektem a musely se casteji dobjet a formtovat.

S touto bateri ltm cel rok bez nutnosti formtovn, drby a castho nabjen.

Byla to vborn volba!
Klasse Lipo fr die Sendeanlage. Ich verwende ihn in der Walkera 2801 Pro ohne Probleme. Nur den Stecker umlten
Perfect, came with nice storage charge.

All cells okey.

Fits nice in my Turnigy TGY 9x transmitter
I am running this battery in my JR 9303 and have found it to be a fantastic power source and you can't beat the price. I can fast charge this at 1.5A and am ready to go in 20 mins. I am putting this battery in other radios I com across in helping people out as well. HIGHLY recommend it! Great product and the Turnigy Nano-Tech line of batteries is great. I use them in the aircraft/gliders as well. Very happy with their performance.
View all reviews
Video
  • Nano Tech Receiver Pack Batteries

Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Plug in download now [1222kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.