Total Price


Cart 0 Cart 0 Loading...

Turnigy XK-3650 5400KV Brushless Inrunner

Generating Links

Turnigy XK-3650 5400KV Brushless Inrunner


Now save save $0.00 $0.00

Shipped From:
  • USA
  • Global
Already Purchased
ETA: No ETA At This Time [ ? ]
want FREE shipping? Click here to find out more!

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

  • Kv(rpm/v) 5400.00
  • Max Current (Motor) (A) 135.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 15.00
  • Power (W) 1700.00
  • Shaft A(mm) 3.18
  • Length B (mm) 50.00
  • Can Diameter C(mm) 36.00
  • Can Length D(mm) 45.00
  • Total Length E(mm) 67.00

Dimension Diagram Guide

  • attributeset-10


Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Turnigy | Verified Buyer

  • Quality
  • Overall
  • Value

Great motor for the price.

Sep 29, 2020

Great motor for the price

Me | Verified Buyer

  • Quality
  • Overall
  • Value

Very good

May 06, 2020

Very nice

Mic | Verified Buyer

  • Overall
  • Value
  • Quality

Good engine

Nov 01, 2019

Good engine

Pastrano | Verified Buyer

  • Value
  • Quality
  • Overall

Piccola bestia

May 20, 2019

Comorato per la mia quanum vandal va alla grande!
2s e pignone 17t originale scalda un po
Ma veramente veloce e divertente
Abinato a esc xcar 120A gira perfettamente
Partenza fluida e tanta potenza consigliatissimo

Ant | Verified Buyer

  • Overall
  • Value
  • Quality

Great motor for the money

May 01, 2019

I put this in a 4 wheel drive rally car with a 120 amp esc. I tryed it on 2s and 3s and I was surprised it didn't get very hot and was very very fast. It has had quite alot of use now on tarmac and grass is still working perfectly. Great motor for the money and i would recommend to anyone looking at buying this. Clocked 40mph on 2s and over 50mph on 3s.

Kristjan | Verified Buyer

  • Overall
  • Value
  • Quality

Wheelies for days on 3s!!!

Apr 29, 2019

I have put this motor in TURNIGY SCT 2WD 1/10 and it was just wheelying on more than half throttle, at full throttle the car was almost doing backflips. Best 15min of driving before the 120A HobbyKing ESC died.
I will be running this motor on 2s when i get a new ESC becouse the motor was geting really hot on 3s.

caca | Verified Buyer

  • Quality
  • Overall
  • Value

good but its an esc fryer

Apr 17, 2019

its been a week since i got this motor i love the motor but its nearly impossible to run on 3 s because even my hobbywing max10 esc is not capable of running this beast on 3s if you want to run on 3s make sure that you run with a nice esc or it will fry your esc

SimonSenpai | Verified Buyer

  • Overall
  • Value
  • Quality

Speedy boy

Jan 09, 2019

This is a good value for the money!!! Fast, runs nicely, has torque and in my opinion it looks cool :D
Just make sure you buy a big ESC for it, otherwise you can fry up the ESC, I choosed a 120A Hobbyking

Jay | Verified Buyer

  • Value
  • Quality
  • Overall

Customer rated

Jan 05, 2019

Fast delivery and shipping, an absolute tonne of power. Used it in my hobby king hornet and this flies!!

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 08, 2016

This is a beast! I love this thing. This will shut your buddy up. I put in a Vandal with an 120amp xcar esc, 3s35c, no other mods, and crushed it. Looks about 60mph.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags