Only in the UK: Check out our In-stock Planes, Drones & More! May Edition

While RC planes and EDF jets are cool, sometimes you just need something different to spice up the hobby. That's where the H-King Paramotor comes into play. Its gentle and stable flight characteristics make it fairly easy to master and once you do get the hang of it, you can perform slow loops and rolls which are something quite novel even for the seasoned RC hobbyist.

The parafoil is made from 100% ripstop fabric and comes pre-rigged with tough polyethylene lines. In the air, the H-King Paramotor truly looks like something straight out of a James Bond movie minus all the hard crashes.

The Durafly Ugly Stick is highly regarded as the best "unconventional" RC trainer plane. Initially manufactured as an aerobatic sports plane, her unparalleled handling at both high and low speeds, combined with her conspicuous design made her a popular "2-in-1 hybrid" choice amongst beginners.

The Ugly Stick comes highly prefabricated and only requires a screwdriver to be completed. Her dynamic color scheme not only makes her a point of discussion on the ground but in the air, orientation is also made easier. At low speeds, she performs superbly just like any other trainers, however, once you get more comfortable, you could try pushing her to the limits and start experimenting with some simple aerobatics maneuvers.

The H-King TTX is an impressive scale rendition of the Cessna TTX. It's made of tough EPO foam and is beautifully crafted with panel lines, scale cockpit, and other immaculate details. Plenty of power with the scale 3-blade propeller.

With an 1100-millimeter (43-inch) wingspan, the TTX is small enough to be transported fully assembled, however, you also have the option to easily detach the wings with the quick-connectors. Take-offs and landings are a breeze thanks to the scale-slotted flaps and the super bright navigation lights. The large hatch area also makes any sort of installation or maintenance super easy.

The Volantex ASW 28 is a sport-scale model that does incorporate flaps, unlike its full-scale counterpart. It comes as a PNF model so you just need to complete some final assembly, install your battery, receiver, and fly. The airframe is a mix of EPO foam for the wings and tail, with a blow-molded plastic fuselage. This gives a slick finish that is also extremely durable.

A recent addition to the ASW 28 is a more powerful 4018-1050kV brushless outrunner motor that rockets the ASW 28 to altitude, then when you throttle down, the propeller folds back for extended soaring. Accessing the battery is easy through the canopy with four small snap locks that keeps the canopy secure.

The Phoenix 2400 is the largest glider of the Phoenix range. It comes with a near-indestructible ABS plastic fuselage and strong EPO foam wings and tail section. The Phoenix is made to last a lifetime with its smooth, rigid, fuselage yet remains light enough for the glider to perform with ease. There is a camera tray included that can be mounted instead of the canopy and once you install your camera, you’ll be able to either enjoy FPV flying or just take footage of your flights.

Assembling the glider is quite easy as the tail is screwed into place. To help with traveling as well as building the wing halves clip into place and have a wing spar for added strength. The main wing is 2400 millimeters long and includes ailerons and flaps for better plane control. The fuselage has a built-in, single wheel for easier landings on rougher landing strips.

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

Features

• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation

The Phantom features tough EPO construction with molded-in camera bays - one forward-looking just under the nose and another mount in the top of the canopy with plywood support pre-installed. This updated version features premium 3K wrapped carbon tube spars and now breaks down into three pieces for easy transport.

This being the kit version you will require your own choice of 9-gram servos, motor, and speed controller - we suggest a low current power system not exceeding 30 amps, this will provide you with flights in excess of 30 minutes on a 3s 4500mAh LiPo.

Features

• Kit Version - Assemble and install your choice of electronics
• Ultra-tough EPO construction
• Ultra stable flight performance
• Excellent FPV platform
• 30 minutes plus flight duration on 4500mAh 3s LiPo
• Easy to Hand Launch, Easy to Land
• Stable Handling at Low and High Speeds
• Updated with 3K wrapped carbon tube spars
• Updated with removable outer wing panels for easy transport

The FPV250 is a mini-sized FPV drone measuring in at a mere 250mm. This durable, inexpensive FPV multi-rotor platform is perfect for FPV racing or obstacle course flying and at your local field, and now with the full-arm length upper facing LEDs that light the translucent frame and props for orientation and the ultra-bright down facing white LEDs making the entire frame glow in the night sky and even more visible in the day. The Included center power distribution board also has a built-in 5V UBEC system for aux component use.

The one-piece frame is extremely durable, giving you the confidence to go FPV barnstorming and yet only weighs 110 grams. The front platform is designed to handle up to a 2 servo pan and tilt camera setup and the rear platform supports the video transmitter, to keep it all nice and balanced. The FPV250 has a center bay large enough for the most popular flight controllers and includes a top crash cage for protection. There are four integrated strap slots on the bottom to securely hold the battery in place for high G maneuvering. The FPV250 motor mounts can handle anything from a 1506 to 2208 motor and the vented arms provide plenty of cooling for your 7~12A ESCs.

Features

• Ultra-bright full arm length frame-mounted LEDs
• All clear frame that grabs the LED lights and glows
• included clear propeller that illuminates with the upper facing LEDs
• Built-in 5V UBEC and PDB
• One-piece construction for durability
• Large 55x55mm cage protected flight controller bay
• Mounting Support for a 2 servo pan and tilt camera and video transmitter
• Wide range of motor and power options
• Removable landing gear
• Included Clear 5030 prop set

The Turnigy H.A.L. (Heavy Aerial Lift) Quadcopter Frame is crafted from high-quality anodized aluminium offering both great looks and performance. The H.A.L. has been designed in-house by our engineering team and manufactured ourselves to keep costs low. We set out to create an aerial video platform that would provide high performance at a price that won't break the bank, and we have achieved that goal!

The H.A.L. also features a stylish removable dome to protect the electronics and provide a tidy look on the mainframe. We have even designed an optional aluminium landing skid set for those who do not plan to use this frame for aerial video (see related items below).