Aerostar 20A RVS G2 32bit (2~4S) Electronic Speed Controller w/Reverse Function & 4A 5~6V SBEC
Aerostar 20A RVS G2 32bit (2~4S) Electronic Speed Controller w/Reverse Function & 4A 5~6V SBEC
Awesome!
Copy and Share the Below URL
Accessories
Special Price $8.57
You save $3.42
Was $11.99
Special Price $38.49
You save $16.50
Was $54.99
The Aerostar RVS G2 next-generation range of brushless speed controllers moves up a notch from the ground-breaking original Aerostar RVS ESCs. They are more compact, lighter, and process faster due to high-performance 32bit technology, have improved functionality and programmable features, and an upgraded, high-amp SBEC system. New generation MOSFETs ensure that the ESC stays within operating temperatures, and can also safely handle the peak current draw specified. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.
The Aerostar RVS G2 brushless reversing speed controllers have been designed for a range of fixed-wing applications including as mentioned above, EDF braking (reverse thrust), floatplane/flying boat operations, and with the soft-start function, geared motors using large standard or folding propellers. Another feature of the G2 range of ESC is the addition of HEF (Higher-Efficiency Function) technology. The HEF circuitry allows for better heat dissipation, and lower energy loss when used with certain applications, this function when selected is very similar to "Active Freewheeling". When set to "Off" (the factory default) it's perfect for low to medium KV outrunner motors, when set to "On", it's perfect for high KV outrunners, and inrunners such as those used in EDFs or direct drive racing models.
Features that have been retained from the original version are the super smooth start-up, linear throttle response, and multiple protection features. These protections include start-up (prevents motor accidentally starting when powering up), low-voltage cut-off, phase loss, and signal loss, to fully protect the components of your ESC. Programming the many functions of the Aerostar RVS G2 ESC is very simple using either your transmitter or the optional LCD programming card.
Installation is very straightforward as these speed controllers come "Plug N Play", no soldering is required as they are supplied pre-fitted with an XT60 connector for the battery, and 3.5mm gold connectors for the motor.
Features:
• 32bit technology for even faster processing
• RVS (reverse function system) allows for instantaneous selection of forward/reverse from the TX
• Includes "High-Efficiency Function" for improved heat dissipation and lower energy loss
• Smaller and lighter than previous versions
• Pre-installed motor and battery connections
• Upgraded and stronger SBEC system (4A@5~6V)
• Programmable using either your Tx or the optional LCD card
Specs:
Type: Aerostar RVS G2 32bit 20amp electronic speed controller
Input Voltage: 2~4S LiPo/5~12 NiMH (6~16V)
Continuous Current: 20A
Burst Current: 30A (10secs)
SBEC Output: 4A@5~6V
Forward/Reverse: Yes (switchable from Tx)
Programmable: Yes
Battery Connector: XT60
Motor Connectors: 3.5mm bullet
Rx Connector: JR type
Dimensions: 60x25x10mm
Weight: 25g
Includes:
Aerostar RVS G2 32bit 20A (2~4S) Electronic Speed Controller w/Reverse Function & 4A 5~6V SBEC
Factory-installed XT60 and 3.5mm bullet connectors
Please note: A copy of the user manual and full list of programmable functions is available under the "Manuals/Files" tab.
Aerostar RVS G2 ESC User Manual
-
Hobbyking Product Profile for the Aerostar G2 RVS Range of ESC Including EDF Braking
Aerostar RVS G2 ESC User Manual | Download [14] |
Aerostar G2 RVS Bluetooth Module Manual | Download [1] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!